How To Set The Programmer - Zanussi ZSM 703 SS Operating And Installation Manual

COOK TIME
END OF COOKING
MANUAL OPERATION
STOP
To set oven for manual operation press
button D.
SETTING THE TIMER
STOP
Press button B and while turning knob A
enter the required time (max. 23 h 59
min.). After required time has been
selected the clock will revert to the time
of day. When time is up an audible signal
will be heard for approx 2 mins. To
cancel press button B and return control
and thermostat knobs to '0' OFF.
To cancel any programme press button B or C
10

HOW TO SET THE PROGRAMMER

STOP
SETTING THE TIME OF DAY
24 HOUR CLOK
- +
Press button B and C at the same time
and turn knob A to enter time of day.
SETTING THE TEMPERATURE
FOR THE MEAT PROBE
- +
Insert the jack plug of the meat probe into the
socket situated on the left hand side of the
oven. Insert probe into meat, close the oven
door. Press button E and while turning knob A
enter the required temperature. (see page 18).
When cooking is completed, an audible signal
will be heard for approx 2 mins., to cancel
press button E.
Remove the meat probe after use.
CLOCK
STOP
- +
B C D E
MEAT PROBE TEMPERATURE
MANUAL
STOP - +
- +
STOP
A
KNOB
AUTOMATIC COOKING
TO SET THE COOKING TIME
STOP
TO SET END OF COOKING TIME
STOP - +
Press button B and while turning knob A
enter the required cooking time.
Press button C and while turning knob A
enter the end of cooking time. Turn the
thermostat and control function knobs to
the required settings. The
temperature light nor oven light will
illuminate until the oven switches on.
When cooking is completed the AUTO
signal will flash and an audible signal will
be heard for approx 2 mins. To cancel
press button E and return control and
thermostat knobs to '0' OFF.
oven