Table of Contents
Advertisement
DO NOT clean the oven door while the
glass panels are warm. If this precaution is
not observed the glass panel may shatter. If
the door glass panel becomes chipped or has
deep scratches, the glass will be weakened
and
must
be
replaced
possibility of the panel shattering.
Contact your local Service Centre who will be
pleased to advise further.
Ensure that the appliance is switched off
and disconnected from the electricity supply
before replacing the bulb to avoid possibility
of an electric shock.
If the oven bulb needs replacing, it must comply
with the following specifications:
Wattage:
Voltage:
Temperatures:
Thread Type:
To replace the faulty bulb.
1. Turn the glass cover anticlockwise and
remove.
2. Remove the faulty bulb by turning it anti-
clockwise and replace with a new one.
3. Refit the glass cover.
Reconnect the appliance to the electricity supply.
14
to
prevent
the
OVEN BULB REPLACEMENT
25W
230/240V(50Hz)
300ºC
E14
Advertisement
Table of Contents
