Table of Contents
Advertisement
— Connect the blue (neutral) wire to the
terminal in the plug which is marked
with the letter 'N' or coloured black.
— Connect the brown (live) wire to the
terminal in the plug which is marked
with the letter 'L' or coloured red.
Upon completion there must be no cut, or
stray strands of wire present and the cable
clamp must be secure over the outer sheath.
A cut off plug inserted into a 13
amp socket is a serious safety
(shock) hazard. Ensure that the
cut off plug is disposed of safely.
Permanent Connection
In the case of a permanent connection, it is
necessary that you install a double pole
switch between the hob and the electricity
supply (mains), with a minimum gap of 3
mm. between the switch contacts and of a
type suitable for the required load in
compliance with the current electric
regulations.
The switch must not break the yellow and
green earth cable at any point.
Ensure that the hob supply cable
does not come into contact with
surfaces with temperatures higher
than 50 deg. C.
Supply cable replacement
The cable used to connect the hob to the
electrical supply must comply to the
specifications given below.
Min. size Cable/flex Cable / flex type Fuse
0.75 mm
2
30
H05 V2V2-F (T90) 3 A
Advertisement
Table of Contents
