• The cookware must not enter the control use. Do not remove the rating plate. It can in- zone. validate the guarantee. • Make sure that the cookware does not pro- trude over the edges of the cooking surface www.zanussi.com...
Page 3
• Carefully obey the instructions for electrical • Fully obey the laws, ordinances, directives connections. There is the risk of injury from and standards in force in the country where electrical current. www.zanussi.com...
20 m³. If it is The minimum distance combustible material installed in a room of volume less than 5 m³ an can be fitted above the hob in line with the www.zanussi.com...
Page 5
R 1/2 (1/2 BSP male thread). When the final connection has been made, it is 2. Turn the knob on the minimum position. essential that a thorough leak test is carried out 3. Remove the knob. on the hob and installation. www.zanussi.com...
Page 6
• The appliance must not be connected with an extension cable, an adapter or a multiple socket. There is a risk of fire. Make sure that the ground connection complies with the standards and regulations force. • The power cable must not touch any hot parts. www.zanussi.com...
Page 7
The panel installed below the hob must be easy into a 13 amp socket is a safety hazard. There to remove and let an easy access in case a is a risk of electrical shock. technical assistance intervention is necessary. www.zanussi.com...
2. Keep the control knob pushed for approxi- misuse of the flame mately 5 seconds; this will let thermocou- Always light the burner before you put ple to warm up. If not, the gas supply will cookware. be interrupted. www.zanussi.com...
120 - 220 mm Warning! Use pots and pans with diameter applicable to the dimension of Front Semi-rap- 120 - 180 mm burner. Do not use cooking vessels on the hotplate that Auxiliary 80 - 160 mm overlap its edges. www.zanussi.com...
1. – Remove immediately: melting plastic, take care when you dry them as the enamel- plastic foil, and food containing sugar. ling process occasionally leaves rough – Stop the appliance and let it cool down before you clean: limescale rings, www.zanussi.com...
5 seconds. The gas ring burns unevenly • Burner crown is blocked with • Make sure that the injector is food residues not blocked and the burner crown is clear of food particles. www.zanussi.com...
>PE<,>PS<, etc. Discard the packaging mate- otherwise be caused by inappropriate waste rials as household waste at the waste disposal handling of this product. For more detailed facilities in your municipality. www.zanussi.com...
Need help?
Do you have a question about the ZGG75524 and is the answer not in the manual?
Questions and answers