Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Zanussi ZGG75XS524
Summary of Contents for Zanussi ZGG75XS524
- Page 1 User Manual GETTING STARTED? EASY. ZGG75524 ZGG75XS524 EN User Manual...
-
Page 2: Safety Information
SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. -
Page 3: Safety Instructions
CAUTION: The cooking process has to be supervised. A short • term cooking process has to be supervised continuously. WARNING: Danger of fire: Do not store items on the cooking • surfaces. Metallic objects such as knives, forks, spoons and lids should •... -
Page 4: Electrical Connection
appliance and the upper drawer, is sufficient for • Use only correct isolation devices: line air circulation. protecting cut-outs, fuses (screw type fuses • The underside of the appliance can get hot removed from the holder), earth leakage trips when in use. If an oven has not been fitted and contactors. - Page 5 • The vapours that very hot oil releases can cause • Discoloration of the enamel or stainless steel spontaneous combustion. has no effect on the performance of the • Used oil, that can contain food remnants, can appliance. cause fire at a lower temperature than oil used CARE AND CLEANING for the first time.
-
Page 6: Product Description
PRODUCT DESCRIPTION COOKING SURFACE LAYOUT Semi-rapid burner Triple Crown burner Rapid burner Auxiliary burner Control knobs CONTROL KNOB Symbol Description Symbol Description minimum gas supply no gas supply / off position ignition position / maximum gas supply DAILY USE BURNER OVERVIEW WARNING! Refer to Safety chapters. -
Page 7: Ignition Of The Burner
3. Adjust the flame after it is regular. If after some tries the burner does not light, check if the crown and its cap are in correct positions. WARNING! Do not keep the control knob pushed for more than 15 seconds. -
Page 8: Care And Cleaning
CAUTION! Make sure that the Diameter of cook- bottoms of pots do not stand above Burner ware (mm) the control knob, otherwise the flame heats the control knob up. Triple Crown 180 - 260 CAUTION! Make sure that pot handles are not above the front edge Rapid 180 - 260 of the cooktop. -
Page 9: Periodic Maintenance
• To clean the enamelled parts, cap and crown, and check that the burner crown holes are not wash them with warm soapy water and dry them obstructed. carefully before you put them back on. PERIODIC MAINTENANCE CLEANING THE SPARK PLUG Speak to your local Authorised Service Centre This feature is obtained through a ceramic ignition periodically to check the conditions of the gas... -
Page 10: Labels Supplied With The Accessories Bag
LABELS SUPPLIED WITH THE ACCESSORIES Stick the adhesive labels as indicated below: MOD. MOD. MOD. TYPE PROD.NO. IP20 PROD.NO. PROD.NO. SER.NO. 0049 SER.NO SER.NO 03 IT DATA DATA MADE IN ITALY A. Stick it on Guarantee Card and send this part C. -
Page 11: Injectors Replacement
If there are other fuel burning appliances in the When the final connection has been made, it is same room, B.S. 5440 Part 2 Current Edition, essential that a thorough leak test is carried out on should be consulted to determine the requisite air the hob and installation. - Page 12 • N — Neutral terminal • or E — Earth terminal Before carrying out the connection, make sure: 1. The limiter valve and the electrical system can take the appliance load (see the rating plate) 2. The supply system is equipped with an efficient earth connection in compliance with the current standards and regulations 3.
- Page 13 REPLACEMENT OF THE CONNECTION ASSEMBLY CABLE The replacement of electric cable must be carried out exclusively by the service force centre or by personnel with similar competencies, in accordance with the current regulations. To replace the connection cable use only H03V2V2-F T90 or equivalent type.
-
Page 14: Possibilities For Insertion
A) supplied seal If a furniture unit is installed at a B) supplied brackets distance of 400 mm above the hob, there must be a minimum safety distance of 50 mm to the left or right from the edge of the hob. -
Page 15: Technical Data
Kitchen unit with oven The electrical connection of the hob and the oven must be installed separately for safety reasons and to let easy remove oven from the unit. TECHNICAL DATA HOB DIMENSIONS Width 744 mm Depth 510 mm BYPASS DIAMETERS BURNER Ø... -
Page 16: Energy Efficiency
0,45 Auxiliary 0,33 ENERGY EFFICIENCY PRODUCT INFORMATION ACCORDING TO EU 66/2014 Model identification ZGG75524XB, ZGG75524XS, ZGG75XS524 Type of hob Built-in hob Number of gas burners Left rear - Semi-rapid 62.0% Right rear - Rapid 61.3% Energy efficiency per gas burner Centre middle - Triple Crown 52.0%... - Page 17 product to your local recycling facility or contact your municipal office.
- Page 20 WWW.ZANUSSI.COM/SHOP...