Multiple Sequence Cooking; Auto Cook Operation - Sharp R-232F Operation Manual With Cookbook

800 w

Hide thumbs Also See for R-232F:

Operation manual with cookbook (34 pages)

Table Of Contents

Table of Contents

R-233 ENGLISH 21/01/2000 11:49 Page 9

A sequence of maximum 3 stages, consisting of manual cooking time and mode, can be set.

Example:

Suppose you want to cook rice for 5 minutes on 100P power and then for 16 minutes on 30 P power.

Input the time

(5 min.)

1st Stage

1. TIMER

knob

NOTE: If 100P is selected as the final power level, it is not necessary to touch the MICROWAVE POWER LEVEL button

AUTO COOK automatically works out the correct

cooking mode and cooking time. You can choose from

10 AUTO COOK menus. What you need to know

when using this automatic function:

1. Press the AUTO COOK button once, the display

will appear as shown.

2. The menu can be chosen by pressing the AUTO

COOK button until the desired menu number is

displayed. See pages 10-13 "AUTO COOK charts"

3. The weight or quantity of the food can be input by

rotating the TIMER/KG/PORTION knob until the

desired weight/quantity is displayed.

- Enter the weight of the food only. Do not include

the weight of the container.

- For food weighing more or less than weights/

quantities given in the cooking chart, use manual

programmes. For best results, follow the cooking

charts in the cookbook.

4. To start cooking press +1min/START button.

5. When action is required (e.g. to turn food over), the

oven stops and the audible signals sound,

remaining cooking time and any indicator will flash

on the display. To continue cooking, press the

+1min/START button.

The final temperature will vary according to the initial

food temperature. Check food is piping hot after

cooking. If necessary, you can extend the cooking

time and change the power level.