By Coordinate - Honda 2009 TL Navigation System Navigation Manual

When you edit the phone number,
continue pushing in on Interface Dial
more than three seconds to display
the Edit Mode screen. You can move
the position of the cursor by rotating
Interface Dial knob. To return the
Enter phone number screen, move
Interface Dial down.
After entering the number, move the
Interface Dial down and select OK.
Multiple listings for the same phone
number may be shown.
NOTE:
All 10 digits must be entered.
Tip:
When using the voice control system,
the entry should be spoken as a
continuous string of numbers. For
example, the telephone number (310)
555-4000 should be spoken as "Three,
one, zero, fi ve, fi ve, fi ve, four, zero, zero,
zero."

By Coordinate

If you select Coordinate from the
MENU screen (Dest. MENU 2),
the display will change to the Enter
Latitude screen. Use the Interface
Dial to input the latitude.
NOTE:
Prior to departure, you can set areas to
avoid. The system then includes them in
its calculations for the destination you
have entered. See Edit Avoid Area on
page 107 .
After entering the latitude, move the
Interface Dial down and select OK.
The display will change as indicated in
the following paragraph.
Entering a Destination
NOTE:
Latitude and longitude must be entered
up to the seconds' value.
If the Enter Longitude screen is
displayed, use the Interface Dial to
input the longitude.
With the selection of Coordinate, it
is assumed that you are searching for
the destination within the area that is in
the closest proximity. The display will
change as indicated on the next page.
Navigation System 43