Table of Contents
Advertisement
The system has a talk back function.
If your spoken letter is not recognized,
the system will talk back to you. For
example, if you say "E" but the system
does not recognize the command, it
will ask you, "Please select the number
of the input letter from the list", and the
following pop-up box will appear:
You should select a letter by saying the
number.
Alternatively, to improve voice
recognition, you can say "Echo" or
"Edward" instead of "E." See page 17
for a list of available words for each
letter.
By Interface Dial:
Select City, and the display then
changes to the Enter city name screen.
Tip:
After the display has been changed
to the Enter city name screen, the
name of the city where your vehicle is
currently located will be displayed.
Vehicle position may not be displayed
when the automobile is traveling off
road or when vehicle position data
cannot be updated. In these situations,
you can select the City that is currently
displayed and conduct a Street search
by moving the Interface Dial down.
Use the Interface Dial to enter the
name of the city.
The system will display a list of city
names, with the closest match to the
name you entered at the top of the list.
Select the number (1-6) of the desired
city from the list.
Entering a Destination
You can also enter part of the name and
look for the name you want from the
list that appears.
Tip:
For name input, you don't need to enter
spaces and symbols (&, -, %, etc.).
The system is also enabled for partial
match searches. For example, when
you search "LOS ANGELES," it is on
the list of search results if you input
"LOS" or "ANGELES."
Listings of cities and towns in the non-
detailed coverage area may have an
asterisk "*" next to their names. If you
select one, a pop-up box is displayed
saying, "No detailed street data...",
and a street address cannot be entered
(see Map Coverage on page 130 ). Try
entering the street fi rst, and then select
the city if available.
Navigation System
31
Advertisement
Table of Contents
