Table of Contents
Advertisement
Frequently Asked Questions
Problem
While I drive, my screen shows white dots
("breadcrumbs") on it. What do they mean?
How can I get rid of the white dots ("breadcrumbs")
from my screen?
A road that I selected to avoid is being used when
routing. What is wrong?
My elevation (shown when I display the current position)
seems to fl uctuate even though my elevation has not
changed.
My elevation is missing on the "current position" screen.
Why?
148 Navigation System
These are called "breadcrumbs." If you drive more than 1/2 mile from
mapped roads, the off-road tracking feature begins to function. See Off-road
Tracking on pages 70 and 112 .
Go to "Vehicle" in the SET UP screen (Other), and set Off-road Tracking
to OFF, then return to the map. See page 112 .
When you "draw" your area to avoid, make sure to select sections of roads
that include at least one intersection. See page 107 .
This is normal and due to errors in satellite position. The elevation can vary
+/- 100 feet. See System Initialization on page 123 .
If the GPS antenna cannot receive signals from at least four satellites, the
elevation is not displayed. Try moving the vehicle into an open area. If the
elevation is zero, or below sea level, the elevation is also not displayed.
Solution
Advertisement
Table of Contents
