Advertisement
MD-MT190H
1
Insert a MiniDisc
4
4
2
1
1
Slide the OPEN lever to re-
lease the compartment door.
2
Lift it up.
Recordable
Recording
prevented
3
Connections
To connect to a stereo system with "LINE OUT" or "AUDIO OUT"
sockets (Analogue connection)
If the audio system has only one pair of sockets,they are usualy for
input only and recording via this connection is not possible.
To the DC IN
5V socket
Insert according to
the direction arrow.
3
3
3
Insert a MiniDisc as shown.
4
Close the compartment door.
When you record on a MiniDisc,
check that the erase prevention tab
is set to the "recordable" position.
LINE IN
Supplied
connection
cable
R IG
H T
L E F
T
Red: To right
White: To Left
2
Connect the AC adaptor
AC 230V, 50/60 Hz
To wall socket.
1
Plug the AC adaptor into the
wall socket.
Before using the unit with a rechargeable battery, the battery has to be charged.
Caution:
Insert the plugs firmly.
When the unit is not in use for extended periods, remove the AC adaptor from
the wall socket.
Preparation for use
The unit does not work
if the HOLD button is set to HOLD.
Remote control unit
Move the HOLD switch to the safety position
(direction indicated by the arrow).
Press the HOLD button for 2 seconds or more.
CAUTION:
It is not recommendable to put the
MiniDisc into a rear pocket, as this
may damage the product when sitting.
– 8 –
To the DC IN 5V socket.
2
Insert the plug on the other
end into the DC IN 5V socket.
Orange mark
Hold
Hold
Released
Advertisement
