User Settings - Sitecom WL-405 Manual

NTP Server
Enable Daylight
Saving Time
Synchronize to
PC time
LED Setting
Click 'Apply' to save settings and make the new settings take effect.

3.11 User Settings

If you wish to allow other people to view the image captured by this camera, but don't
want to allow them to modify system settings, you can give them user-level user name
and password, so they can only view the image and can not change any system setting.
The user settings menu can be accessed by opening the 'Toolbox' menu, and selecting the
'User settings' tab.
This IP camera supports up to 4 user accounts.
The descriptions of every setting in this menu will be given below:
Item
Login
Password
Confirm
Password
Authority
Add
Modify
Remove
Please input the IP address or host name of NTP server here. You
can use default value 'pool.ntp.org', or ask your ISP for the IP
address or host name, if they have one.
Select 'Yes' if your area of residence uses daylight saving; if not,
select 'No'.
Click this button and the IP camera will use the current time setting
of your computer as IP camera's time setting.
Switch the LED light of this IP camera off, so 'LAN' and 'WLAN' LED
on the IP camera will stop working, in case you don't want other
people know the camera is transferring data.
You can click this button again to switch LED lights on again.
Description
Specify the user name here. Please use alphanumerical characters (0
to 9, A to Z, and a to z). Not using symbols and space.
Specify the password for this user here.
Specify the password for this user here again.
Select 'Operator' and this user will be able to change the settings of
IP camera; select 'Guest' and this user can only view the image.
Click 'Add' to add a new user with the information listed above.
To modify the information of an existing user, select his / her user
account, change the information, and then click this button to save
changes.
Select an existing user and click this button to remove it.