System Settings - Sitecom WL-405 Manual

3.10 System Settings

Camera information allows you to set the name and administrator's password of this
camera, change the time settings, and turn the status LED on or off.
The System Settings menu can be accessed by opening the 'Toolbox' menu, and selecting
the 'System Settings' tab.
The descriptions of every setting in this menu will be given below:
Item
Camera Name
Password
Confirm
Password
Set Date/Time
manually
Time Zone
Description
Please specify the name of this IP Camera here. This can be used to
identify your camera on the network when you have more than one
IP camera in the same network.
Default name begins with 'IC-' plus the last 6 characters of the MAC
address of this IP camera. You can modify the name to the one you
can remember and meaningful to you, but never give all IP cameras
in the same network with same name.
Please specify user name 'admin' 's password here. (The one you
need when you log onto web management interface and use 'admin'
as user name.
Please input the same password again, to make sure there's no typo.
Please input the date and time you wish to set here.
Date / time format is YYYY / MM / DD HH:MM:SS
Time is in 24-hour format.
You can click 'Synchronize to PC time' to use the time of the
computer you're using.
th
Example: 24 August 2007 = 2007/ 08 / 24,
and PM 9:24:30 = 21:24:30
Please select the time zone of the country / city of resident from
dropdown menu here.