Sitecom WL-405 Manual page 20

2.2.3.2 'E-Mail Settings tab'
If you want to use motion detection function and wish to get an email that contains the
image captured by the camera, please setup your email related parameters here first.
Item
E-Mail Subject
Recipient E-Mail
Address
New
Edit
Delete
Sender E-Mail
Address
SMTP Server
SMTP port
Description
Specify the subject of sending email.
Here lists all email addresses you set.
Click this button and you'll be prompted to input the email address.
Click 'OK' to save changes.
Select an email address from 'Recipient E-Mail Address' box, and
click 'Edit' to edit the email address.
Delete selected email address.
Specify the email address of email sender.
Specify the IP address or host name of the SMTP server you wish to
use. For most of ISPs they will only allow its subscriber to use their
SMTP server, if you don't know which SMTP server you should use,
please refer to the setting of your email software or ask your ISP /
network administrator.
Specify the port number of the SMTP server you wish to use here.
By default (and the setting of most of SMTP servers) it's '25'.