Upnp - Sitecom WL-405 Manual

The descriptions of every setting in this menu will be given below:
Item
Enable DDNS
Provider
Host Name
User Name
Password
Click 'Apply' to save settings and make the new settings take effect.

3.7.4 UPNP

When UPnP function is activated, all UPnP-compatible computers / network devices will be
able to discover this IP camera automatically (only those in the same local network).
This function is useful and you don't have to remember the IP address of this IP camera.
Simply open 'Network neighbourhood' and it's there!
The descriptions of every setting in this menu will be given below:
Item
Enable UPnP
Click 'Apply' to save settings and make the new settings take effect.
After the UPnP function is activated, a popup message will appear:
Description
Select 'Enable' to activate Dynamic DNS function of this IP camera,
select 'Disable' to disable it.
Select dynamic DNS service provider here. Only dyndns.org is
available currently.
Input dynamic DNS host name here.
Input dynamic DNS user name here, must be the same as the one
you applied on dyndns.org.
Input dynamic DNS password here, must be the same as the one
you applied on dyndns.org.
Description
Select 'Enable' to activate UPnP function of this IP camera, select
'Disable' to disable it.