Sitecom WL-405 Manual page 15

Refresh
Name*
Model
IP*
Username*
Web Port*
Password
Video Format**
Reset
OK
Cancel
*: It's recommended to use 'Select' button to fill the content of this field.
**: Only available for cameras support this function.
After you've set all channels you wish to set, click 'OK' to save settings, and if everything's
correct, you'll see the camera's image in IP camera surveillance software's main menu:
configuration fields.
Rescan all cameras on your local network. If you didn't see the
camera you expected in 'Camera Search' box, or a new camera has
been joined to your local network after last scan.
Input the name of camera here. Default value is the first 6 bytes of
camera's MAC address, you can change the name of camera so you
can remember the camera's location of purpose easily.
Displays the model of selected camera, this field can not be
changed.
Input the IP address of camera.
Input the user name of camera.
Input the web port of the camera. By default it's '80'.
Input the password of camera. Default value is '1234'. You should
change the password if you changed the password of selected
camera.
Select the video encoding format of this camera (MJPEG or MPEG4).
Clear all fields in 'Camera Configuration' section.
Save settings in this tab.
Discard all settings in this tab.