Motion Recording - Sitecom WL-405 Manual

2.2.2.3 Motion Recording

With this function activated, only motions captured by the camera will be recorded, so you
don't have to waste hard disk storage space on images you don't need to pay attention to.
Here are the descriptions of all setting items:
Item
Channel
Enable
Disable
Recording Time
Invoke alarm when
motion is triggered
Send mail when
motion is triggered
OK
Cancel
Description
Select the channel number you wish to set.
Enable motion record function.
Disable motion record function.
Select the time duration that camera will record when a motion
has been detected from dropdown menu in seconds.
Send an alarm when a motion has been detected by the camera.
Send an email to a pre-defined address when a motion has been
detected by the camera.
Save settings in this tab.
Discard all settings in this tab.