3.
raise the router bit to the desired height.
4.
adjust the fence back and away from the bit
only enough to allow the ball bearing to con-
trol the depth of cut, as shown in figures 24
& 25.
ball bearing
router bit
figure 24. proper setup for profile cutting
(top view).
model g0528 (mfg. 5/04+)
ball bearing
router bit
figure 25. proper setup for profile cutting
(Side view).
5.
adjust the fence as close as possible to the
bearing. the fence will serve as a back-up
support, reducing the chance of an accident.
Fence
-23-