Programmed Play - Sharp CD-E110H Operation Manual

Listening to a CD (CDs) (continued)
CD-E110H
ENGLISH

" Programmed play

This may be operated only with the remote control.
You can choose up to 20 selections for playback in the order you
like.
1
Whilst in the stop mode, press
one of the 1 - 3 buttons to
select the desired disc.
2
Press the or button to
select the desired track.
3
Press the MEMORY button to save the track number.
When the track is memorised, "MEMORY" will appear.
4
Repeat steps 1 - 3 for other tracks. Up to 20 tracks can be
programmed.
If you make a mistake, the programmed tracks can be cleared
by pressing the CLEAR button.
5
Press the / button to start playback.
E-15
To clear the programmed selections:
Whilst the "MEMORY" indicator is lit, set the
CD to the stop mode and then press the
CLEAR button.
Each time the button is pressed, one track will
be cleared, beginning with the last track pro-
Selected disc number
grammed. When all the tracks are cleared,
"MEMORY" will disappear.
Adding tracks to the programme:
If a programme has been previously stored, the "MEMORY" indica-
tor will be displayed. Then follow steps 1 - 3 to add tracks. The new
tracks will be stored after the last track of the original programme.
Selected track number
Notes:
! If you open the disc tray, change to another function or enter the
stand-by mode, the programmed sequence is automatically can-
celled.
! During programme operation, random play is not possible.
Playback order
03/1/21 CD-E110H(H)E2.fm