Enhancing Your System - Sharp CD-DV777W Operation Manual

Enhancing your system

CD-DV777W
ENGLISH
The connection lead is not included. Purchase a commercially available lead
as shown below.
Game system, VCR,
DVD player, etc.
To the line output sockets
Yellow
White
Red
Video cable
(not supplied)
Auto power on function:
When you press any of the following buttons, the unit turns on.
I GAME/VIDEO button (main unit and remote control): The unit turns on and
the "GAME" function is activated.
I 0 button on the remote control or main unit: The unit turns on and playback
of the last function starts (DVD/CD, TAPE, TUNER, GAME).
E-65
*DV777W_EP61-66 65
Listening to sounds of game, VCR, DVD, etc.
H
1.
Connect a video game system, VCR, DVD player, etc. to
the front GAME INPUT (VIDEO, AUDIO L and R) sockets.
2.
Connect a TV to the rear VIDEO OUT socket.
Switch the TV input to auxiliary.
3.
Press the ON/STAND-BY button to turn the power on.
4.
Press the GAME/VIDEO button.
5.
Play the connected equipment.
You can enjoy sounds from the supplied speakers and images on the TV.
Note:
Yellow Red
White To prevent noise interference, place the unit away from the television.
To record sounds of game, VCR, etc.
H
1.
Load a cassette in the TAPE 2 cassette compartment.
RCA lead
2.
Press the GAME/VIDEO button.
(not supplied)
3.
Press the I6 button.
4.
Press the 0 or 1 button.
5.
Start the game system, VCR, etc.
Headphones
H
I Before plugging in or unplugging the headphones, reduce the volume.
I Be sure your headphones have a 3.5 mm (1/8") diameter plug and the
impedance is between 16 ohms and 50 ohms. The recommended
impedance is 32 ohms.
I Plugging in the headphones disconnects the speakers automatically. Adjust
the volume using the VOLUME control.
12/4/04, 13:53
CD-DV777W (Z)
TINSZA083AWZZ