Specifications - Sharp HT-SB350(W) Operation Manual

Specifications

As part of our policy of continuous improvement, SHARP
reserves the right to make design and specification changes for
product improvement without prior notice. The performance
specification figures indicated are nominal values of production
unit. There may be some deviations from these values in
individual unit.
General
Power source DC IN 12V
(AC 100 - 240 V ~ 50/60 Hz)
Power Power on: 11 W
consumption Power stand-by: 0.6 W (*)
Output power Front speaker:
RMS: 12 W (6 W + 6 W) (10% T.H.D.)
RMS: 9.6 W (4.8 W + 4.8 W) (0.9% T.H.D.)
Subwoofer:
RMS: 20 W (10% T.H.D.)
RMS: 13 W (0.9% T.H.D.)
Speaker 2.1-way Speaker System
Front speakers: 40 mm (1-1/2") Full Range
Impedance: 12 ohms / Channel
Subwoofer: 57 mm (2-1/4") Woofer (x4)
Impedance: 3 ohms
(12 ohms x 4 parallel connections)
Audio output Subwoofer Pre Out: 10 kohms
terminals
4A: AC/DC adaptor
Input terminals Analogue input (LINE 1):
RCA type x 1pair (L/R)
500 mV / 47 kohms
Analogue input (LINE 2):
Stereo mini socket Ø 3.5 mm
100 mV / 47 kohms
Coaxial digital input (DIGITAL 1):
RCA type x 1
Optical digital input (DIGITAL 2):
Square type x 1
Dimensions Width: 800 mm (31-1/2")
Height: 96 mm (3-3/4")
Depth: 70 mm (2-3/4")
Weight 1.90 kg (4.19 lbs.)
(*) This power consumption value is obtained when in the
power stand-by mode.
HT-SB350(W)
HT-SB350(BK)
ENGLISH
E-20