Page 1
MODEL HT-SB350(BK) SOUND BAR SYSTEM OPERATION MANUAL is a trademark of SRS Labs, Inc. WOW HD technology is incorporated under license from SRS Labs, Inc. Note: This product is recommended for flat panel TV (LED, LCD and plasma). Accessories Please confirm that only the following accessories are included. Remote control x 1 AC/DC adaptor x 1 (RRMCGA251AWSA)
Special notes CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Explanation of Graphical Symbols: The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage”...
IMPORTANT SAFETY INSTRUCTIONS Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. However, improper use can result in electric shock and/or fire.
Do not remove the outer cover, as this may ● result in electric shock. Refer internal service to your local SHARP service facility. This unit should only be used within the range of ● 41°F - 95°F (5°C - 35°C).
Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise. In no event shall Sharp be liable, or in any way responsible, for any damages or defects in the Product which were caused by repairs or attempted repairs performed by anyone other than an authorized servicer.
Turn up/down the TV Down Buttons volume. Note: ● Some models of SHARP TV may not be operable. ● SHARP TV remote control will not work with HT-SB350(BK) system. System preparation Make sure to unplug the AC power cord before installing the unit or changing the position.
Page 8
System preparation (continued) Driving screws ■ SHARP designed the speakers so you may hang them on the wall. Use proper screws (not sup- plied). See below for size and type. 1/8” (3.2 mm) 3/16” (5 mm) 3/8” (9 mm) Min. 7/8” (22 mm) Wall mount angle fixed to ■...
Placing the sound bar Installation image: DVD player Notes: As the sound from the speaker is omni-di- ● rectional, you can place it anywhere you like. However, it is recommended to place it as close to the TV as possible.
Increase the TV output volume to enjoy the sound from the speaker. ● If the speaker volume is continuously in very high level, the unit will mute and recover after 3 seconds. To optical...
AC power connection After checking all the connections have been made correctly, connect the AC power cord to the AC power input jack, then to the AC outlet. Using with the AC/DC adaptor ■ 1 Plug the AC power cord into the AC/DC adaptor. 2 Plug the AC/DC adaptor cable into the DC IN- PUT jack on the unit.
The Dolby Virtual Speaker (DVS) creates virtual surrounds comparable to the 5.1ch sound produced by the 2.1ch speaker. When setting DVS to “ON” for 2 channel stereo signals, Dolby Pro Logic II brings out virtual sound effects through the signals converted into 5.1ch.
SUBWOOFER LEVEL button. To decrease the level, press the SUBWOOFER LEVEL button. Note: When sound from the speaker is distorted, decrease the subwoofer level. Bass control ■ Press the BASS/TREBLE button to select “BASS”. Within 5 seconds, press the VOLUME (+ or –) button to adjust the bass.
Troubleshooting chart Many potential problems can be resolved by the owner without calling a service technician. If something is wrong with this product, check the following before calling your authorised SHARP dealer or service center. General ■ Symptom No sound is heard.
Troubleshooting chart (continued) Symptom Possible cause The unit cannot be Is the AC power cord ● turned on with the of the unit plugged in? remote control. Is the battery ● inserted? TV cannot be Depending on the ● operated with the model, some or all remote control.
It may cause malfunctions. Specifications As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production unit. There may be some deviations from these values in individual unit.