Sharp HT-SB350(W) Operation Manual page 24

Sound bar connections to TVs (continued)
HT-SB350(W)
HT-SB350(BK)
Connecting to a TV
ENGLISH
If the TV/monitor has an audio output, connect it to the LINE IN
1 sockets on the rear of the unit.
To select LINE IN 1 function:
On the unit: Press FUNCTION button repeatedly until "L1" is
displayed.
On remote control: Press LINE button repeatedly until "L1" is
displayed.
TV
Sound bar
E-11
To audio output sockets
RCA cable (supplied)
RIGHT LEFT
LINE IN 2 LINE IN 1
Connecting to a TV (with Headphone socket)
If the TV/monitor has headphone socket, connect it to the LINE
IN 2 socket on the rear of the unit.
To select LINE IN 2 function:
On the unit: Press FUNCTION button repeatedly until "L2" is
displayed.
On remote control: Press LINE button repeatedly until "L2" is
displayed.
To LINE IN 1
sockets
Notes:
If the TV volume is continuously in low level, the unit will
automatically power off. Increase the TV output volume to
enjoy the sound from the speaker.
If the speaker volume is continuously in very high level, the
unit will mute and recover after 3 seconds.
TV
To HEADPHONE socket
Audio cable (not supplied)
Sound bar
LINE IN 2
HEADPHONE
To AUDIO LINE
IN 2 socket
RIGHT LEFT
LINE IN 1