Eco Dect; Setting The Alarm Clock - Siemens Gigaset C59H User Manual

ECO DECT

ECO DECT
You are helping to protect the environ-
ment with your Gigaset C59H.
Reduced energy consumption
Your telephone has a power-saving
adapter plug and uses less power.
Reducing radiation (dependent on
base)
The radiation can only be reduced if
your base supports this function.
The transmission power of your telephone
is automatically reduced depending on
the distance to the base.
You can reduce the radiation of the hand-
set and base even further by using Eco
Mode or Eco Mode+. For further informa-
tion, please refer to your base user guide.
34

Setting the alarm clock

Prerequisite: The date and time have
¢
already been set (
Activating/deactivating the alarm
clock and setting the wake-up time
É
¢ ¢
v
Alarm Clock
¤
You can enter data in the following
fields:
Activation:
Select or Off.
On
Time:
Enter the wake-up time in 4-digit for-
mat.
Volume:
Set the volume (1–6).
Melody:
Select melody.
Press the display key.
§Save§
¼
In idle status, the
time are displayed.
A wake-up call is signalled on the
display and with the selected ringtone
¢
( page 2). The wake-up call sounds
for 60 seconds. If no key is pressed, the
wake-up call is repeated twice at five
minute intervals and then switched off.
During a call, the wake-up call is only
signalled by a short tone.
Deactivating the wake-up call/
repeating after a pause (snooze mode)
Prerequisite: A wake-up call is sounding.
Press the display key. The
§OFF§
wake-up call is deactivated.
or
Press the display key or any
§Snooze§
key. The wake-up call is deacti-
vated and then repeated after
5 minutes. After the second
repetition the wake-up call is
deactivated completely.
page 13).
icon and wake-up