Switching Off The Input Confirmation; Cleaning And Care; Ceramic; Hob Surround - Siemens EF6 Series Instruction Manual

Changing the time
Touch the symbol repeatedly until the display for the kitchen
0
timer flashes. Make your new settings.
Cancelling prematurely
Touch the symbol repeatedly until the display for the kitchen
0
timer flashes. Touch the
¾
flashes in the timer display.
‹‹

Switching off the input confirmation

When you touch a panel, a short sound confirms this. You can
switch this sound off.
Set all 4 hotplates to heat setting 3.
1.
Switch off the hotplates one after the other from right to left.
2.

Cleaning and care

The information in this section provides help on how best to
care for your hob.
Suitable maintenance and cleaning products can be purchased
from the after-sales service or in our e-Shop.

Ceramic

Clean the hob after each use. This will prevent spills from
burning onto the ceramic.
Only clean the hob when it has cooled down sufficiently.
Use only cleaning agents which are suitable for ceramic. Follow
the cleaning instructions on the packaging.
Never use:
Undiluted washing-up liquid
■
Detergent intended for dishwashers
■
Scouring agents
■

Rectifying faults

Malfunctions often have simple explanations. Please read the
following notes before calling the after-sales service.
Indicator Fault
Blank There is no power supply.
Automatic time limit activated.
‹ is flashing
The controls are damp or an object is
is flashing
"
resting on them.
Display faulty.
"‹
Childproof lock faulty.
, all hotplates
"...
are switched off.
and symbols at the same time.
¿
Notes
The kitchen timer continues to operate while the pause
■
function is activated.
The kitchen timer no longer functions after a power cut.
■
Select a heat setting for a hotplate. Press the hotplate control
3.
until a signal sounds.
Switch off the hotplate control.
4.
You can also switch entry confirmation on again. Proceed in
exactly the same way as for switching off.
Harsh cleaning agents such as oven spray or stain remover
■
Abrasive sponges
■
High-pressure cleaners or steam jet cleaners
■
Ground-in dirt can be best removed with a glass scraper,
available from retailers. Please note the manufacturer's
instructions.
You can also obtain a suitable glass scraper from our after-
sales service or from the e-Shop.

Hob surround

To prevent damage to the hob surround, please observe the
following instructions:
Use only warm, soapy water.
■
Do not use harsh or abrasive agents.
■
Do not use the glass scraper.
■
Action
Check the household fuse for the appliance. Check whether there is a
power cut by trying other electronic appliances.
Switch the hotplate off. Make your new settings.
Dry the controls or remove the object.
Switch the appliance off and back on again after about 30 seconds
using either the household fuse or the circuit breaker in the fuse box.
Contact the after-sales service if this appears in the display again.
Switch the appliance off and back on again after about 30 seconds
using either the household fuse or the circuit breaker in the fuse box.
Contact the after-sales service if this appears on the display again. You
can still cook with a faulty childproof lock.
9