Programming The Hob; Switching The Hob On And Off; Setting The Hotplate; Cooking Guidelines - Siemens EH8 SB1 Series Instruction Manual

Hide thumbs Also See for EH8 SB1 Series:
Table of Contents

Advertisement

Programming the hob

This section will show you how to program the hotplates. The
table contains power levels and cooking times for several
dishes.

Switching the hob on and off

The hob is turned on and off with the main switch.
To switch on: press the
#
main switch lights up. The hob is ready for use.
To switch off: press the
#
main switch disappears. All hotplates are off. The residual heat
indicator stays on until the hotplates have cooled down
completely.
Note: The hob switches off automatically when all the hotplates
are switched off for more than 20 seconds.

Setting the hotplate

The desired power level is set in the programming panel.
Power level 1 = minimum power.
Power level 9 = maximum power.
Each power level has an intermediate setting. This is marked
with a dot.

Cooking guidelines

The table below contains some examples.
The cooking times depend on the power level, type, weight and
quality of the food. As such they are approximate.
Power levels influence the cooking results.
Melt
Chocolate, chocolate coating, butter, honey
Gelatine
Heating and warming
Stew (e.g., lentils)
Milk**
Sausages heated in water**
Defrosting and heating
Frozen spinach
Frozen goulash
Slow cooking, simmering
Potato pancakes
Fish
White sauces (e.g., bechamel)
Whipped sauces (e.g., Bearnaise, Hollandaise)
* Continue cooking without a lid
** Uncovered
6
symbol. The indicator above the
symbol until the indicator above the
Selecting the power level
The hob must be switched on.
Selecting the hotplate: Touch the programming panel for the
1.
required hotplate.
Within the next 10 seconds, slide a finger on the
2.
programming panel until the desired power level lights up.

Changing the power level
Slide your finger along the programming panel until the
required power level is displayed.
Switch off the hotplate
Select the required hotplate and power level
turns off and the residual heat indicator appears.
Note: If no pan has been placed on the induction hotplate, the
selected power level flashes. After a certain time, the hotplate
switches off.
Remove purées, creams and thick sauces from time to time, if
they get too hot.
Use power level 9 to begin cooking.
Ongoing cooking
setting
1-1.
1-1.
1-2
1.-2.
3-4
2­-3
2­-3
4­-5*
4 -5*
1-2
3-4

. The hotplate
Ongoing cooking time
in minutes
-
-
-
-
-
5-15 min
20-30 min
20-30 min
10-15 min
3-6 min
8-12 min

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eh8 sc1 series

Table of Contents