Advertisement
Automatic time limiter
Switching off input confirmation
16
2.
Touch both the + and – symbols at the same time.
The light will flash on and off and show
alternatively A and the power level (e.g.4). You
have now activated the function. The hotplate will
now come on at the maximum power level 9.
After the corresponding amount of time has
passed (see the table in the section power level
specifications") the hotplate will automatically
switch to the level selected (e.g.4). The rapid
pre-heating function has now finished and has
switched off.
If a hotplate is in constant use for a long time without
the setting being changed, the automatic time limiter
will be activated.
The hotplate heating is interrupted.
An F and an 8 flash alternately in the hotplate
indicator.
The indicator goes out when you touch any control
panel. Now you can reset the hotplate.
The time at which the time restriction is activated
depends on the heat setting (1 to 10 hours).
A short buzz confirms that a button has been
touched. This buzzer can be turned off:
Switch on the hob using the main switch.
1.
Position the cooking zone at power level
d with the symbol +.
2.
Touch the - symbol until 0 appears.
3.
Touch the main switch for at least 5 seconds, after
which a confirmation signal sounds.
You may also switch the input confirmation on again.
Proceed in the same manner as for switching off.
Advertisement
