Table of Contents
Advertisement
ESU02371
Ski spring preload adjustment
The spring preload can be adjusted by turning the spring
preload adjuster 1.
CD-11E
Spring seat length*
Preload
a Length
∗ The spring seat length changes approximately 1.5 mm (0.06 in) with
each full turn of the adjuster.
CAUTION :
@
The left and right ski spring preload must be set to
the same setting. Uneven settings can cause poor
handling and loss of stability.
@
WARNING
@
This shock absorber contains highly pressurized
nitrogen gas. It could explode by improper handling,
causing injury, or property damage.
G
Do not tamper with or attempt to open the shock
absorber.
G
Do not subject the shock absorber to an open
flame or other high heat source, which could
cause it to explode.
G
Do not deform or damage the shock absorber in
any way.
G
Do not dispose of a worn or damaged shock
absorber by yourself. Take the unit to a Yamaha
dealer.
@
8-19
Standard
Increased ←
←
Harder
Maximum
125.5 mm
115.5 mm
(4.94 in)
(4.55 in)
→ Decreased
→
Softer
Minimum
105.5 mm
(4.15 in)
Advertisement
Table of Contents
