Table of Contents
Advertisement
A
B
3. Pull up the dipstick and check that the oil is between
the upper and lower levels. If not, add oil to the upper
level.
2 Upper level
3 Lower level
Drive chain oil: GL-3
75W or 80W
È For models without reverse transmissions (SXV70M)
É For models with reverse transmissions
(not applicable)
CAUTION :
@
Make sure that no foreign material enters the drive
chain housing.
@
4. Install the dipstick and fit the loop 4 of the dipstick
handle onto the projection 5 of the drive chain hous-
ing.
Chain tension adjustment
1. Loosen the locknut.
2. Turn the adjusting bolt clockwise until it is finger tight.
3. Hold the adjusting bolt in place while tightening the
locknut.
1 Locknut
2 Adjusting bolt
8-16
Advertisement
Table of Contents
