Changing The Name Of A Handset; Changing A Handset's Internal Number - Siemens Gigaset S440 User Manual

Internal join-in
The line is engaged with an external call.
The screen will display information to that
effect. You would like to join-in on the
existing external call.
c
Press and hold the talk key.
You are linked into the call. All parties hear
a signal tone. During this time, this hand-
set will not display any information and no
selection can be made from this handset.
Ending join-in
a
Press the end call key.
All parties hear a signal tone.
If the first internal participant presses the
end call key a, the handset that is
'joined-in' remains connected to the exter-
nal participant.

Changing the name of a handset

The names "INT 1", "INT 2" etc. are
assigned automatically at registration.
You can change these names. The name
must be no more than 10 characters. The
changed name is displayed in every hand-
set's list.
u
Open list of handsets. Your
own handset is indicated by <.
s
Select handset.
Press the display key.
§Edit§
~
Enter name.
Press the display key.
§Save§
Changing a handset's
internal number
A handset is automatically assigned the
lowest unassigned number when it is reg-
istered. If all the numbers have been
assigned, number 6 is overwritten, pro-
vided the handset is in idle status. You can
change the internal number of all regis-
tered handsets (1-6).
u
Open list of handsets. Your
own handset is indicated by <.
v
Open menu.
Edit H/Set No.
Select and press
handsets is displayed.
s
The current number flashes.
Select a handset.
~
Enter the new internal
number(1-6). The handset's
old number is overwritten.
Press the display key to save
§Save§
the input.
a
Press and hold (idle status).
You will hear the error tone (descending
tone sequence) if you assign an internal
number twice.
¤
Repeat the process with an unused
number.
Using several handsets
. The list of
§OK§
35