Using Attachment Data - Siemens Gigaset S440 User Manual

SMS (text messages)
Forwarding an SMS
¤
You are reading an SMS (page 25):
©
Press the display key.
Select and press
Forward
page 22.
Attachments are forwarded. If a service
provider does not permit the forwarding
of attachments:
¤
Select Use Text, to forward the SMS
without attachments.
¤
Confirm the prompt
not contain picture/ melody. Continue?
with .
§Yes§
Adding a number to the directory
Adding the sender's number
¤
Open incoming message list and select
entry (page 25).
©
Press the display key. To con-
tinue, see see page 16.
Notes:
– You can create a special directory for SMS
within your directory by putting an star (*)
before the names.
– An attached mail box identifier is added to
the directory.
Copying/selecting numbers from a
SMS text
¤
Read SMS (page 25) and scroll to the
telephone number.
The digits are reverse-highlighted.
Ó
Press the display key. Continue
see page 16.
Or:
c
Press the talk key to dial the
number.
If you wish to use the number to send an
SMS:
¤
Save the number with the area code
(dialling code) in the directory.
26
. Next see
§OK§
New SMS will
Changing the character set
¤
Read the SMS (page 25):
©
Press the display key.
Character Set
Text is shown in the selected character
set.

Using attachment data

An attachment is reverse-highlighted in
the SMS. An SMS can contain multiple
attachments.
Listening to and saving a melody
You can save approx. 5 melodies in "iMel-
ody" format and install them as ringtones
(page 41). The melodies are stored in the
Sound Manager.
You can also save and install these melo-
dies on other handsets registered to the
same base station.
You can find a range of melodies on the
Internet at www.siemens.com/
gigasets440. The Internet pages will tell
you which data is available in your coun-
try.
Listening to a melody
¤
Read the SMS (page 25) and move the
cursor to the line in which the attach-
ment can be found. The melody is
played back immediately.
Saving a melody
¤
Open the SMS to read it (page 25).
¤
Listen to the melody.
Press the display key.
§Save§
~
If necessary, change the name
of the melody.
Press the display key.
§Save§
Melodies are saved in the Sound Manager
(page 42).