Table of Contents
Advertisement
2.6 - Installing the Memory
Before installing memory, ensure that the memory you have is compatible
with the motherboard and processor. Only DDR2-667/533/400 DIMM
modules are required. Check the TYAN Web site at: www.tyan.com for
details of the type of memory recommended for your motherboard.
The following diagram shows common types of DDR2 memory modules.
Key points to note before installing memory:
•
Only DDR2 667/533 /400 Registered ECC memory modules are
supported.
•
All installed memory will automatically be detected and no jumpers or
settings need changing.
For optimal dual-channel DDR2 operation, always install memory in pairs
beginning with P1_DIMM1 and P1_DIMM3. Memory modules of the same
type and density are required for dual-channel DDR2 Operation.
Mismatched memory may cause system instability.
Attention!
1.
To ensure that the board runs efficiently and does not overheat,
make sure there is air flow around the DIMM area.
24
http://www.tyan.com
Advertisement
Table of Contents
