Internet - Siemens Gigaset SE361 WLAN User Manual

u
Remote management enabled
Any user, including unauthorised users, who gains knowledge of the system pass-
word for your device can access your device's configuration program via the Inter-
net. The section entitled "Setting up Remote Management" on page 67 describes
how to avoid this security risk.
ì
Click on Refresh to refresh this screen and update the displayed data.

Internet

On the Internet screen in the Status menu you will find information about the status
of your device's Internet connection.
u
Connection status
Shows the status of the connection to the Internet and, if connected, the duration
of the connection. If you have set Connect on demand or Connect manually as the
connection mode (see page 41), you can Connect or Disconnect the connection to
the Internet manually here.
u
MAC address
Shows the public MAC address of your device.
u
PPPoE pass-through
Shows the status of PPPoE pass-through for your DSL or cable connection for estab-
lishing Internet connections straight from a PC to your network.
u
Address Translation (NAT)
– Status
Shows the status of NAT (Network Address Translation) for your Internet connec-
tion.
– NAT table
Shows the number of entries currently existing in the NAT table.
Click on Empty to delete all currently existing entries in the NAT table.
u
Dynamic DNS
– Dynamic DNS
Shows the status of dynamic DNS for your Internet connection.
– Domain name
Shows the domain name set for dynamic DNS.
ì
Click on Refresh to refresh this screen and update the displayed data.
Status information
73