Assigning Static Ip Addresses To Individual Pcs - Siemens Gigaset SE361 WLAN User Manual

Configuring the DHCP server
The Gigaset SE361 WLAN has a
the IP addresses of the PCs are automatically assigned by the Gigaset SE361 WLAN.
Note:
u
If the Gigaset SE361 WLAN's DHCP server is activated, you can configure the net-
work setting on the PC so that the option Obtain an IP address automatically is
set. To find out how to do this, please read the section entitled
"Configuring the local network" on page 76.
u
If you deactivate the DHCP server, you will have to assign a static IP address for the
PCs via the network settings.
ì
To activate the DHCP server, select On.
ì
If the DHCP server is active, you can define a Lease time. The
the period for which the PCs keep the IP addresses assigned to them without any
change.
Note:
If you select the Never expires option, the IP addresses are never changed. You
must select this option if you want to make NAT or firewall settings using the IP
addresses of the PCs, or else you must assign these PCs static IP addresses.
ì
Define the range of IP addresses which the Gigaset SE361 WLAN should use to auto-
matically assign IP addresses to PCs. Define the First issued IP address and the Last
issued IP address.
ì
You can define the name of a domain (Windows workgroup) in the Domain name
field.

Assigning static IP addresses to individual PCs

Even if you have activated the DHCP server you can still assign a static IP address to indi-
vidual PCs (e.g. when setting up these PCs for NAT functions).
ì
Enter the MAC address and the name of the PC in the Device name field.
ì
Enter the IP address you wish to assign to the PC in the field below.
ì
Click on Add to add the entry to the list.
ì
Click on Delete to delete the entry from the list.
ì
Click on OK to apply the settings.
Configuring the Advanced Settings
DHCP server, which is enabled on delivery. As a result,
Lease time determines
55