Wep Encryption - Siemens Gigaset SE361 WLAN User Manual

ì
Enter a key in the Pre-shared key field (up to 32 alphanumerical characters) and
confirm it by entering it again.
ì
Apply the settings by clicking OK.

WEP encryption

If WPA is not supported by all components in your wireless network, we advise you to
activate WEP Encryption
ì
In the Security field, select the WEP option.
ì
Select the Authentication type:
– Select Shared if you want each client to log in to the network with a specified key.
– Select Open to permit data transfer within your wireless network without using
a key.
You can choose either the standard 64-bit keys or the more robust 128-bit keys for
encryption. The keys are generated in hexadecimal or in ASCII format. You must use the
same keys for encryption and decryption for both the Gigaset SE361 WLAN and all your
wireless network adapters.
on your wireless network components.
Configuring the Advanced Settings
59