The User Interface; Launching The User Interface - Siemens Gigaset SE361 WLAN User Manual

The user interface

The user interface
Once you have configured the network settings on a PC in your local network, you can
then use that PC to configure the Gigaset SE361 WLAN with the aid of the Gigaset
SE361 WLAN's user interface. You can use any browser for the configuration, the rec-
ommended products are Microsoft Internet Explorer 6.0 or higher, Mozilla Firefox 1.0
or higher.
Note:
To start the configuration environment you might need to deactivate the HTTP proxy
for your browser (see page 82 for Windows XP and page 90 for Windows 2000).
If you use Mozilla Firefox or if you use Internet Explorer and Windows XP Service Pack
2, you need to configure the popup blocker (see page 82for Windows XP and page 90
for Windows 2000).

Launching the user interface

To access the Gigaset SE361 WLAN's user interface:
ì
Launch your Web browser.
ì
Enter the IP address of the Gigaset SE361 WLAN in the browser's address field.
http://192.168.2.1
A login screen appears for you to enter the password.
ì
Enter the password and click on OK.
The default password on delivery is admin.
Note:
For security reasons you should change the password at a later stage (see
page 32).
A page containing security information is displayed.
ì
Click on OK.
You will now see the start screen.
Note:
If the start page does not show up and the automatic language detection does not
work properly (see paragraph "Selecting a language" on page 26), please try to
delete the temporary Internet files and Cookies from your browser.
Microsoft Internet Explorer:
Tools – Internet Options – Delete Cookies and Delete Files
Mozilla Firefox:
Tools – Options – Privacy – Show Cookies – Remove all Cookies.
24