Care And Cleaning - Sharp SJ-DK20T Operation Manual

CARE AND CLEANING

Some household cleaning chemicals may affect the inside sur-
faces and plastic shelves resulting in splitting or cracks occur-
ring.
When cleaning all plastic parts inside this refrigerator, only use
diluted dishwashing liquid(soapy water). Make sure that all plas-
tic parts are thoroughly rinsed with water after cleaning.
1.Remove the shelves and pockets from the cabinet and door. Wash them in warm soapy dishwashing
water; rinse in clean water and dry.
2.Clean the inside with a cloth soaked in warm soapy dishwashing water. Then, use cold water to
wipe off soapy water.
3.Wipe the exterior with a soft cloth each time it is soiled.
4.Clean Magnetic door seal with a toothbrush and warm soapy dishwashing water.
5.Whenever the refrigerator is moved to clean or repositioned, the Evaporating pan should be
removed and cleaned.
NOTE
• Do not use polishing powder, benzine, hot water etc.
• If undiluted detergent is used or soapy water is not wiped off thoroughly, cracking of plastic parts
can result.
• Wipe any food oils adhered to plastic components as they can cause cracking of the plastic sur-
face.
Evaporating pan
How to remove
Move the Evaporating pan to pull
it toward yourself.
Replacing method of the lamp bulb
1.Unplug the refrigerator first to prevent electric shock.
2.Remove the Light cover.
3.Replace the lamp bulb with same type.
Base E14,MAX 10W, T-20
Switching off your refrigerator
If you switch your refrigerator off when you are going away for an extended period, remove all food,
clean the interior thoroughly. Remove the power cord plug from the power socket and leave all
doors open.
How to set
Set Evaporating pan so that
the two protrusions come
through its corresponding
holes.
Light cover
Evaporating pan
7