Care And Cleaning - Sharp SJ-XP624FB Operation Manual

Care and cleaning

Important
To prevent cracks on the inside surfaces and plastic
components, follow these tips .
• Wipe out food oil that has adhered to plastic parts.
• Some household chemicals may cause damage, so use
only diluted washing-up liquid (soapy water).
• Wipe any spills from the refrigerator immediately as acid
or alkaline in the food can cause cracking and staining
of plastic parts.
Cleaning
For hygienic reasons, make sure to do following
things regularly .
■ Remove the accessories (e.g. shelves) from the cabinet
and the door. Wash them with warm soapy dishwashing
water. After that, rinse them in clean water and dry.
(Only fruit and vegetable shelf is not removable.)
How to remove the fruit and vegetable crisper
cover
Hole
■ Clean the inside with a cloth soaked in warm soapy
dishwashing water. Then, use cold water to wipe off
soapy water thoroughly.
■ Wipe the exterior with a soft cloth each time it gets
dirty.
■ Clean the Magnetic door seal with a toothbrush and
warm soapy dishwashing water.
■ Wipe the control panel with a dry cloth.
Note
• Do not use hot water, household cleaning powders,
creams or spray-on cleaning products, or any other
cleaning products such as mineral turpentine,
methylated spirits, thinners, petrol etc. These may
damage your refrigerator and may void any warranty.
• If the power supply is disconnected, please wait at least
5 minutes before re-connecting power.
• The glass shelves weigh approximately 3 kg each. Hold
them firmly when removing from the cabinet and carry.
• Do not drop objects inside the refrigerator or strike the
inner wall. This may cause cracks to the inner surface.
Tips for saving energy
■ Keep the ventilation space as much as possible around the refrigerator.
■ Keep your refrigerator out of direct sunlight, and do not place it next to a heat generating appliance.
■ Avoid opening the door as much as possible.
■ Hot foods should be cooled before storing.
■ Place the food evenly on the shelves to allow the cool air to circulate efficiently.
Note
Remove the cover
carefully not to break
the projection.
Projection
portion
Before transporting
Wipe up water in the evaporating pan. Before wiping
up the water, wait more than 1 hour after pulling out the
power plug because the refrigeration cycle equipment
is extremely hot.
(The evaporating pan is located on the rear of the
product.)
Switching off your refrigerator
If the refrigerator needs to be switched off for an
extended period, the following steps should be taken to
reduce the growth of mould:
1. Remove all food.
2. Remove the power plug from the power point.
3. Clean and dry the interior thoroughly.
4. Ensure that all the doors are wedged open slightly
for air circulation.
Defrosting
Defrosting is automatically operated by a unique energy
saving system.
When the compartment light is blown
Contact the service agent approved by SHARP to
replace the light. The light is not to be replaced other
than by a qualified service personnel.
Evaporating pan
11