Using Multiple Handsets; Registering Handsets; De-Registering Handsets; Locating A Handset ("Paging") - Siemens Gigaset SL400 User Manual

Using multiple handsets

Using multiple handsets

Registering handsets

You can register up to six handsets to your
base.
A Gigaset handset can be registered on up to
four bases.
Manually registering
Gigaset handsets to the Gigaset
SL400
You must manually register the handset on
both the handset (1) and the base (2).
Once the registration process has been com-
pleted successfully, the handset returns to
idle state. The handset's internal number is
shown in the display e.g., INT 1. If not, repeat
the procedure.
1) On the handset
The handset is not registered to a base.
§Register§
Press the display key.
The handset is already registered to a base:
Ï
¢ ¢
v
Registration
¢
Register Handset
If the handset is already registered to four
bases:
s
Select base, e.g., Base 3 and
§OK§
press
~
If required, enter the system
PIN for the base and press
A message appears stating that the hand-
set is searching for a base that is ready for
registration.
2) On the base
¤
Within 60 seconds, press and hold the
registration/paging button on the base
¢
( page 2) (approx. 3 seconds).
56
.
§OK§
.
Registering other handsets
You can register other Gigaset handsets and
handsets for other devices with GAP func-
tionality as follows.
1) On the handset
¤
Start to register the handset as
described in its user guide.
2) On the base
¤
Press and hold the registration/paging
button on the base (
(approx. 3 sec.).

De-registering handsets

You can de-egister all other registered hand-
sets from each of the registered Gigaset
handsets.
Ï
¢ ¢
v
Registration
¢
De-reg. Handset
s
Select the internal subscriber
you wish to de-register and
§OK§
press
(The handset you are currently
using is highlighted with <).
~
Enter the current system PIN
and press
§Yes§
Press the display key.

Locating a handset ("Paging")

You can locate your handset using the base.
¤
Briefly press the registration/paging but-
¢
ton on the base (
¤
All handsets will ring simultaneously
("paging"), even if the ringtones are deac-
tivated.
Ending paging
¤
Briefly press the registration/paging but-
ton on the base or press the talk key c
on the handset.
¢
page 2)
.
§OK§
.
page 2).