Download  Print this page

Appendix; Caring For Your Telephone; Contact With Liquid; Specifications - SIEMENS Gigaset SL400 User Manual

Hide thumbs

Advertisement

Appendix

Caring for your telephone

Wipe the device with a damp cloth or an
antistatic cloth. Do not use solvent or a
microfibre cloth.
Never use a dry cloth as this can cause static.

Contact with liquid

If the device comes into contact with liquid:
1. Unplug the power supply and/or re-
move the battery from the handset im-
mediately.
2. Allow the liquid to drain from the device.
3. Pat all parts dry. Place the device (hand-
set with the battery compartment open
and the keypad facing down) in a dry,
warm place for at least 72 hours (not in
a microwave, oven etc.).
4. Do not switch on the device again until
it is completely dry.
When it has fully dried out, you will normally
be able to use it again.

Specifications

Batteries
Technology: Lithium ion (Li-Ion):
Voltage:
Capacity:
Type:
The handset is supplied with the recom-
mended battery. Only an original battery
!
may be used.
Due to the constant progression in battery
development, the list of recommended bat-
teries in the FAQ section of the Gigaset Cus-
tomer Care pages is regularly updated:
www.gigaset.com/customercare
The device is supplied with the recom-
mended battery.
Handset operating times/charging
times
The operating time of your Gigaset depends
on the capacity and age of the battery and
the way it is used. (All times are maximum
possible times).
Standby time (hours) *
Talktime (hours)
Operating time for 1.5 hrs of calls per
day (hours) **
Charging time in charger (hours)
*
** without display backlight
("Setting the display backlight"
Base power consumption
In standby mode
During a call
3.7 V
750 mAh
V30145-K1310-X445
without/with display backlight
Appendix
230/95
14
120
3
¢
page 65)
SL400
SL400A
approx.
approx.
1.1 W
1.2 W
approx.
approx.
1.2 W
1.3 W
79

Advertisement

Table of Contents

   Also See for SIEMENS Gigaset SL400

   Related Manuals for SIEMENS Gigaset SL400

Comments to this Manuals

Symbols: 0
Latest comments: