Before Operating; Getting Started; Stop/Clear; To Cancel A Programme During Cooking - Sharp R-677MST Operation Manual

A39559, R877 En. Rus. O/M

BEFORE OPERATING

Getting Started

Step
Plug the oven into a power point.
1
Ensure the oven door is closed. The dis-
play will begin flashing "88:88".
Press the STOP/CLEAR pad so that the
oven beeps.
2
Only the dots (:) will remain in the
display.
NOTE:
After the cooking and kitchen timer, the display
will show only the dots (:).

Stop/Clear

Use the STOP/CLEAR pad to:
1. Stop the oven temporarily during cooking.
2. Clear if you make a mistake during program-
ming.
To Cancel a Programme
During Cooking
Press the STOP/CLEAR pad twice.

Heating without Food

Some smoke and odor may occur for a while at
the beginning of Grill, Mix Cooking or Automatic
Operations (except Russian Menu Microwave
and Express Defrost), but the oven is not out of
order.
To remove the cause of the smoke and odor,
operate the oven without food for 20 min. on Grill
using top and bottom grills before the first use
and after cleaning.
R677 MST [EN].p65
Procedure
5
Step
Ensure that no food is in the oven.
Press the GRILL pad 3 times.
1
Enter the heating time (20 min.).
2
Press the INSTANT COOK/START pad.
The timer begins to count down. When
it reaches zero, all indicators will go out
and only the dots will remain in the
3
display. The cooling fan will remain on
until the oven cavity has been cooled.
IMPORTANT:
During this operation, some smoke and
odor will occur. Therefore open the win-
dows or run the ventillation fan in the
room.
Open the door to cool the oven cavity.
WARNING:
The oven door, outer cabinet and oven
4
cavity will become hot and pay atten-
tion to avoid burn when cooling the
oven.
5
6/12/07, 12:01 PM
Procedure
x 3