Before Operation; Setting The Clock - Sharp R-383M Operation Manual With Cookbook

R-383M O/M & C/B 28/04/2000
Plug in the oven.
1. The oven display will flash:
2. Press the STOP/CLEAR key:
3. The display will show:
There are two setting modes: 12 hour clock and 24 hour clock:
1. To set the 12 hour clock, press the AUTOSTART/CLOCK
key once,
2. To set the 24 hour clock, press the AUTOSTART /CLOCK
key twice,
To set the time of day:
Example:
To set the 24 hour clock to 23:35:
1. Select the
24-hour clock.
AUTO START
CLOCK
x2
5. To enter the
minutes press the
10 MIN key 3
times.
10min.
x3
NOTE:
1. If you press any of the time keys too many times, continue to press until your desired time appears.
2. Press the STOP/CLEAR key if you make a mistake during programming.
3. If the electrical power supply to your microwave oven is interrupted, the display will intermittently
show:
erased. The time of day will also be erased.
4. When you want to reset the time of day, follow the above example again.
11:39 Page 7
will appear in the display.
will appear in the display.
2. To enter the hours
press the 10
MIN key twice.
10min.
x2
6. Then press the
1 MIN key 5
times.
1min.
x5
after the power is reinstated. If this occurs during cooking, the programme will be

BEFORE OPERATION

1.
STIR TURN KG•LB PCS MICRO COOK
2.
STOP
x1
CLEAR
3.
STIR TURN KG•LB PCS MICRO COOK

SETTING THE CLOCK

AUTO START
CLOCK x1
AUTO START
x2
CLOCK
4. To change from hours to
3. Then the 1 MIN
key 3 times.
1min.
x3
7. To start the clock press the
AUTOSTART/CLOCK
key once.
AUTO START
CLOCK
x1
7
minutes press the
AUTOSTART /CLOCK
key once.
AUTO START
CLOCK
x1
Check the display:
STIR TURN KG•LB PCS MICRO COOK