Stop Key; Setting The Clock - Sharp R-35ST Operation Manual

R-35ST English 24/02/2005

STOP KEY

Use of the STOP key:
1. Erasing a mistake during programming.
2. Stopping the oven temporaily during cooking.
3. Cancelling a programme during cooking by
pressing the STOP key twice.

SETTING THE CLOCK

There are two setting modes: 12 hour clock and 24 hour clock.
1. To set the 12 hour clock, press the clock key once
appear in the display.
2. To set the 24 hour clock, press the clock key twice
appear in the display.
To set the clock, follow the example below.
Example:
To set the 24 hour clock to 23:35
1. Choose the 24-hour clock
by pressing the CLOCK
key twice.
x2
4. Set the minutes:
Press the 10 MIN key three times.
Press the 1 MIN key five times.
x3
NOTE:
1. Press the STOP key if you make a mistake during
programming.
2. If the electrical power supply to your microwave
oven is interrupted, the display will intermittently
show after the power is reinstated. If this
16:30 Page 8
2. Set the hours:
Press the 10 MIN key twice.
Press the 1 MIN key three times.
x2
5. Start the clock by
pressing the CLOCK
key once.
x5
8
will
x1
will
x2
3. Change from hours to
minutes by pressing the
CLOCK key once.
x3
Check the display
x1
occurs during cooking, the programme will be
erased. The time of day will also be erased.
3. When you want to reset the time of day, follow the
above example again.
x1