Aerial Connection; Speaker Connection - Sharp XL-HP888V Operation Manual

" Aerial connection

Supplied FM aerial:
Connect the FM aerial wire to the FM 75 OHMS terminal and posi-
tion the FM aerial wire in the direction where the strongest signal
can be received.
Supplied AM loop aerial:
Connect the AM loop aerial to the AM LOOP socket. Position the
AM loop aerial for optimum reception. Place the AM loop aerial on a
shelf, etc., or attach it to a stand or a wall with screws (not supplied).
Note:
Placing the aerial on the unit or near the AC power lead may cause
noise pickup. Place the aerial away from the unit for better recep-
tion.
Installing the AM loop aerial:
< Assembling > < Attaching to the wall >
Wall

" Speaker connection

Connect the black wire to the minus (-) terminal, and the red wire to
the plus (+) terminal.
Caution:
! Use speakers with an impedance of 6 ohms or more, as lower im-
pedance speakers can damage the unit.
! Do not mistake the right and the left chan-
nels. The right speaker is the one on the right
side when you face the unit.
! Do not let the bare speaker wires touch
each other.
! Do not allow any objects to fall into or to be
placed in the bass reflex ducts.
! Do not stand or sit on the speakers. You may
be injured.
Screws (not supplied)
04/5/17
Red Black
Incorrect
XL-HP888V(Z)E1.fm
TINSZA075AWZZ
XL-HP888V
ENGLISH
4
E-10