Sharp XL-HP888V Operation Manual page 28

Advanced video CD playback (continued)
XL-HP888V
ENGLISH
" To play back the video CD manually
Usually this unit detects the video CD and plays back pictures and
sounds. In case this unit fails to judge it correctly, you can play back
the video CD manually.
1
Press the VCD AUTO/VCD button until "VCD ON" appears
on the TV screen.
2
Press the / (SELECT/RESUME
To return to the automatic video CD detection mode:
Press the VCD AUTO/VCD button until
"VCD AUTO" appears on the TV
screen.
Notes:
! This setting will be cancelled when you change the discs.
! Whilst in the "VCD ON" state, you cannot play back audio CDs.
! This setting will not work during video CD and MP3 disc play-
back.
E-27
" Changing the TV screen display
You can check the operation of the main unit by the on-screen dis-
play.
Each time the OSD (OSD ON/OFF) button
is pressed during playback or in the stop
mode, the display will change as follows:
<TV screen>
[During stop mode]
VCD ON
) button.
[During playback]
<TV screen>
Track
VCD AUTO
number
Note:
The displays may differ depending on the discs.
04/5/17
00:00
No display
002/010 01:26
No display
Elapsed time
Total
number of
tracks
XL-HP888V(Z)E3.fm
TINSZA075AWZZ