Sharp XL-HP888V Operation Manual page 31

MP3 disc:
MP3 is a form of compression. It is an acronym which stands for
MPEG Audio Layer 3.
MP3 is a type of audio code which is processed by significant com-
pression from the original audio source with very little loss in sound
quality.
Notes:
! Due to the structure of its disc information, it takes longer to read
an MP3 disc than a normal CD (approximately 20 to 90 seconds).
! "
" indicator will light up after the unit reads information on an
MP3 disc.
! This system supports MPEG 1 Layer 3, MPEG 2 Layer 3, and
VBR files.
! During VBR file playback, time counter in the display may differ
from its actual playback time.
" To change the display (MP3 discs only)
Whilst in the stop mode or playback mode, press the MP3 DISPLAY
button.
Each time the button is pressed, the display will change as follows.
[When in the stop mode]
Total number of tracks
Track name
[When in the playback mode]
Track number Elapsed playback
time
Track name
" To select the desired folder or track by name
(MP3 discs only)
1
Whilst in the stop mode, press the MP3 DISPLAY button to
display the folder name.
2
Select the desired folder by pressing the
(NEXT
3
Press the MP3 DISPLAY button
to display the track name.
4
Select the desired track by pressing the
(NEXT
5
Press the
SUME
back.
Folder name
Note:
After selecting a disc with one of the
will not change even if the MP3 DISPLAY button is pressed, and
neither the folder nor track name is displayed.
Folder name
04/5/17
(
) button.
(
) button.
/ (SELECT/RE-
) button to begin play-
1 - 5 buttons, the display
XL-HP888V(Z)E3.fm
XL-HP888V
ENGLISH
PREV.) or
PREV.) or
4
E-30
TINSZA075AWZZ