Panasonic CQ-C3305N Operating Instructions Manual page 7

Radio
This chapter explains how to listen to the radio.
1
Press [SOURCE] to select the radio
mode.
2
Press [BAND] to select a band.
3
Select a station.
Frequency Adjustment
[] (TUNE): Higher
[] (TUNE): Lower
Note: Hold down for 0.5 sec. or more and release
for station search.
Preset Station Selection
Press the numeric button [1] to [6].
Notes:
• For tuning in on only stations whose receiving
conditions are good in the seeking mode, set LOCAL to
ON. ( page 26)
• For reducing noise when a receiving FM stereo wave is
weak, set FM MONO to ON. ( page 26)
Band Frequency
Lights while receiving an FM stereo signal.
12
CQ-C3305N
Preset Number
Lights while LOCAL is activated.
( page 26)
Lights while MONO is activated.
( page 26)
Press [DISP].
AM (LW/MW)
Frequency
Clock time (CT)*
Display off
* Adjust the clock when "NO CT" appears on the screen.

(Clock Adjustment page 9)
Up to 6 stations can be preset in AM, FM1, FM2, and FM3
respectively.
Auto Preset Memory (APM)
Stations with good receiving conditions automatically
preset.
1
Select a band.
2
Hold down [BAND] (APM) for 2 sec. or
more.
The preset stations under best receiving conditions
are received for 5 sec. each after presetting the
stations (SCAN). To stop scanning, press the
numeric button [1] to [6].
Notes:
• New stations overwrite existing saved stations.
• Only RDS stations will be saved at default setting (AF
ON). To select non-RDS stations, set AF to
OFF. ( page 15)
Manual Station Preset
1
Tune in to a station.
2
Hold down the numeric button [1] to [6]
for 2 sec. or more.
FM (Non RDS)
Frequency
PS (Programme Service
Name)
Clock time (CT)*
Display off
13
CQ-C3305N