Golden Technologies Compass GP600 SS Owner's Manual page 14

Compass Owner's Manual – Models GP600 SS, GP600 CC
JOYSTICK INSTALLATION
1. Position the joystick on the joystick bracket. Match the holes in the joystick with the
holes in the bracket. See figure 1.
2. Insert the 4 Allen-head screws with lock washers through the bracket and into the
holes in the joystick.
3. Use an Allen wrench to tighten the screws.
4. Connect the joystick cable to the controller cable. See figure 2.
5. Use the provided Velcro tie-wraps and under arm clip to secure the controller cable
to the armrest bracket.
Allen-head screws
ASSEMBLY
Figure 1
Joystick Cable
Figure 2
13
Joystick Bracket
Revised 052313