Visualization Mode - Aiwa MM-FX500 Operating Instructions Manual

MM-FX500 MANAGER OPERATION

Visualization mode

You can change the appearance of the graphic display in the player display (see page 15)
by changing the visualization mode.
Visualization Mode
Spectrum Options
Oscilloscope Options
1 Select Tools - Player Tools - Visualization from the menu bar. The Visualization
Mode menu will be displayed on the screen.
The sound output pattern displayed in the Graphic display will be changed according
to your selection from the Visualization Mode menu.
• Select Visualization mode
Oscilloscope
Spectrum
Off
Refresh Rate
• Select Spectrum Options when Spectrum is selected
Lines
Bars
Peaks
Analyzer Fall Off
Peak Fall Off
• Select Oscilloscope Options when Oscilloscope is selected
Dot
Line
Solid
2 Click OK to apply the setting.
18
ENGLISH
: Display a wave-chart pattern
: Display a bar-chart pattern
: Turn off the graphic display
: Change the refresh (sampling) rate (Slow
: Display the spectrum with lines
: Display the spectrum with bars
: Turn peak hold ON or OFF
: Change the refresh (sampling) rate (Slow
: Change the peak displaying time (Short
: Display the wave with a dotted line
: Display the wave with a line
: Display the wave with a solid surface
EXIT button
OK button Cancel button
Fast)
Fast)
Long)