Wireless Site Survey - Sitecom WL-130 Manual

Parameter
MAC Address
Tx Packet
Rx Packet
TX Rate
Power Saving
Expired Time
Refresh
Close

Wireless Site Survey

When this access point is in "Universal Repeater mode", it should associate with an access
point or station and connect to your wireless LAN through the associated access point or
station. "Wireless Site Survey" searches for all available access points near by. You can select
one access point listed in this table.
Wireless Range Extender (WL-130) Configuration
Description
MAC address of this active wireless station.
The number of transmitted packets that are sent out from this
active wireless station.
The number of received packets that are received by this active
wireless station.
The transmission rate in Mbps.
Shows if the wireless client is in Power Saving mode.
The time in seconds before dissociation. If the wireless station
is idle longer than the expired time, the access point will
dissociate it. The wireless client station has to associate again
when it become active.
Refresh the "Active Wireless Client Table".
Close the "Active Wireless Client Table".
16