Table of Contents
Advertisement
SETTING UP YOUR TV
DTV Manual Tuning
NOTE: The content of this menu varies depending on the DTV
input (Antenna, Cable, or Satellite) that is currently selected.
Manual Tuning
This feature is available for service engineers or can be used for
direct channel entry if the multiplex channel is known.
a
Select DTV Manual Tuning from the System Setup
menu and press OK.
DTV Manual Tuning
WEAK
Signal Strength
Quality
GOOD
Channel
b
Enter the multiplex number using the number
C
buttons or use
or
down.
c
Highlight Start Scan and press OK. The television will
automatically search for that multiplex.
DTV Manual Tuning
0 New Channels - Total 6
New
Pos.
Name
ABC ONE
1
2
ABC TWO
7
ABC THREE
40
ABC NEWS 24
51
ABCi
When the multiplex is found, any channels that are
not currently in the channel list will be added and the
channel information at the top of the screen will be
updated.
d
Repeat as necessary. Press EXIT to finish.
AVERAGE
STRONG
13
Start Scan
c
to adjust the number up or
Type
Manual Tuning for DVB-C
When Ant/Cable/Satellite is set to Cable, DTV Manual
Tuning items are as follows:
Frequency – input a specific frequency to be scanned
Modulation – choose from one of five QAM modulation
options
Symbol Rate – input a specific baud rate (KS/s) to be used for
the manual scan
Highlight Start Scan and press OK.
Manual Tuning for DVB-S
When Ant/Cable/Satellite is set to Satellite, DTV Manual
Tuning items are as follows:
DTV Manual Tuning - Satellite
Signal Strength
Quality
Satellite
Transponder
Frequency
Symbol Rate
Polarisation
Search Option
B
b
Press
or
to highlight an item (Satellite, Transponder,
Frequency, Symbol Rate, Polarisation or Search Option)
C
c
and press
or
to select the required option.
Highlight Start Scan and press OK.
24
WEAK
AVERAGE
STRONG
POOR
ASTRA 28.2°E
1/83
10714 MHz
22000 KS/s
H
Free to Air
Start Scan
Advertisement
Table of Contents
